当前位置

BLUEDV for USB_HS and win7 win8 drivers

主标签

天气

在线用户

当前有0个用户在线。

mmdvm hs usb version

linux  port is ttyACM0 windows port is COMXX

if you see this port just install bluedv and select port to use it

linux is very simple ,just plug it,you can find /dev/ttyACM0

win7 need drivers win10 don't need drivers .

http://wiki.stm32duino.com/index.php?title=Windows_driver_installation

https://github.com/rogerclarkmelbourne/Arduino_STM32/archive/master.zip

unzip master.zip then

 

Please run drivers/win/install_drivers.bat (Windows 7 or newer).

Note. This doesn't actually install new driver files. Windows comes pre-installed with a compatible Serial USB driver and a DFU (device firmware update) driver. However, the built in drivers need to be associated with the USB ID of the Maple serial and DFU devices. The batch file and wdi-simple.exe do the clever stuff to convince Windows that it should use these drivers for the Maple serial and DFU devices.

The Maple DFU device appears after the board is reset.

Windows device manager maple dfu.png

If the board was programmed with a sketch, then the bootloader will start the sketch. The DFU device disappears and the Maple Serial device appears instead as a virtual COM port.

Windows device manager maple serial.png

then install bluedv to work

 

https://www.pa7lim.nl/bluedv-linux/

 

https://www.pa7lim.nl/bluedv-windows/

img: 

用户登录

聚合

订阅 聚合

My IGATE

RASPBERRY