当前位置

mmdvmcal for windows to test mmdvm_hs rx ber and dmr mobile rx ber

主标签

天气

在线用户

当前有0个用户在线。

Usage: MMDVMCal <port> BY BG7IYN [email protected]

change Run_win.bat com6 to your port number 
then run Run_win.bat
windows: port = \\.\com6

The commands are:
    H/h      Display help
    Q/q      Quit
    W/w      Enable/disable modem debug messages
    E/e      Enter frequency (current: 433000000 Hz)
    F        Increase frequency
    f        Decrease frequency
    Z/z      Enter frequency step
    T        Increase deviation
    t        Decrease deviation
    P        Increase RF power
    p        Decrease RF power
    C/c      Carrier Only Mode
    D/d      DMR Deviation Mode (Adjust for 2.75Khz Deviation)
    M/m      DMR Simplex 1031 Hz Test Pattern (CC1 ID1 TG9)
    K/k      BER Test Mode (FEC) for D-Star
    b        BER Test Mode (FEC) for DMR Simplex (CC1)
    B        BER Test Mode (1031 Hz Test Pattern) for DMR Simplex (CC1 ID1 TG9)
    J        BER Test Mode (FEC) for YSF
    j        BER Test Mode (FEC) for P25
    n        BER Test Mode (FEC) for NXDN
    g        POCSAG 600Hz Test Pattern
    S/s      RSSI Mode
    I/i      Interrupt Counter Mode
    V/v      Display version of MMDVMCal
    <space>  Toggle transmit

 

 

i tested MMDVM HS usb version VHF RXOFFSET is 250 UHF RXOFFSET is 1300

so VHF and UHF offset is not the same!

with mmdvm cal  you can test any hotspot to know it 's  RXOFFSET so easy!

img: 

用户登录

聚合

订阅 聚合

My IGATE

RASPBERRY